Home
About Us
Online Catalog
Find a Distributor

Contact Us


Medical Grade Silicone Blocks

• Non-Sterile
• Steam sterilizable
• Implantable grade silicone

 

 

 

Catalog No.
A
B
C
       
SB-01
5.00 cm
3.00 cm
1.00 cm
SB-02
6.00 cm
4.00 cm
1.50 cm
SB-03
7.00 cm
5.00 cm
2.00 cm

 

CLEANING: Scrub in solution of hot soapy water to remove possible surface contaminants. Use a non-oily cleaner or mild soap. DO NOT USE synthetic detergents or oil-based soaps, as these may leach out to cause a tissue reaction. Rinse in hot water and follow with a thorough rinse in distilled water.

Sterilize: Must be autoclaved. Autoclave by High Speed Instrument (Flash) Sterilizer in clean open tray. Sterilize for eight (8) minutes at 270F (130 C), 30 psi.

DO NOT GAS STERILIZE. DO NOT RESTERILIZE.

 

 

 

To order products, for more information or if you have any questions, please feel free to contact us at (800) 998-8580.

Note: The Invotec International, Inc. website is not composed to provide medical advice. Should you have any questions about any of the Invotec products shown in this website, or a medical condition they address, always consult a physician or your healthcare provider.